Grid Repair Kit
Repair scratched or broken defroster lines. The damaged grid area is masked off and repaired by painting the conductive coating over the damaged area. The coating bonds aggressively, dries quickly and is color matched for invisible repairs. Each kit comes with instructions, grid masking tape, cap brush applicator and enough conductive repair material for many repairs.

2100 Grid Kit - $19.95

 More  |  Add to Cart  |  View Cart  |  Checkout 

Tab Bonding Kit
Reattach main power tabs to rear window defrosters using this kits two part silver adhesive. This highly conductive adhesive cures quickly, bonds aggressively, forming the electrical and structural connection in one simple operation. Each kit comes with complete instructions, sandpaper, stir sticks, mixing pads and enough material for many repairs. Tabs not included. See the Uni-Clip Kit. 

2000 Tab Kit - $28.95 

More  |  Add to Cart  |  View Cart  |  Checkout 

Experts Solder Kit
The Frost Fighter Solder Kit is a solder paste used to re-solder separated main power tabs to automotive rear window defrosters. The high metals solder paste melts quickly when heat is applied. This kit requires special tools and expertise.

2010 Experts Solder Kit - $28.95 

 More  |  Add to Cart  |  View Cart  |  Checkout 

Combination Pack  
This kit combines both the Tab and Grid Repair Kits at a discount.

These two kits are ideal for tackling big defroster repairs with damaged grids and broken tabs. Includes full instructions, masking tape, sand paper, mixing sticks, and mixing pads.

Trade customers please see the Master Kit below. 

2200 Combination Pack - $43.95

 Add to Cart  |  View Cart  |  Checkout

Clear View Defroster Kits
Complete Defroster/Defogger Kits. The Frost Fighter Clear View Kits have everything you need to install a high quality defroster that melts snow and ice plus clears mist instantly. Clear View Kits provide full rear window coverage with an attractive factory look. Available in three sizes.

More on Clear View Defroster Kits...

2600 Clear View Kits - $45.95 and up
See the Product Selector to order

Clear View Specialty Kits
Clear View kits offer tremendous flexibility in designing heaters for glass and plastic applications. Defroster controls, heaters for bus destination signs, front wipers, snow plows, tractors, Van rear doors and other specialty glass and plastic heating applications are all possible.

More on Clear View Specialty Products...

Uni-Clip Replacement Tab
When the main power tabs are separated from the defroster the metal tabs can be lost or damaged. These tabs are typically copper and are soldered onto the defroster. Each Uni-Clip Kit includes metal replacement tab/clips that fit all makes and models.

Needs the 2000 Tab Bonding Kit

2300 Uni-Clip Replacement Tab - $5.95

More  |  Add to Cart  |  View Cart  |  Checkout  

Uni-Con Replacement Connector
Connectors can be lost or damaged. These connectors are crimped onto the power wire of the defroster. Each Uni-Con Kit includes four replacement connectors. These connectors are crimped on the power wire and fit all makes and model. Connector and cover only. Black

2320 Uni-Con Replacement Connector  - $5.95

More  |  Add to Cart  |  View Cart  |  Checkout

Troubleshoot Test Lamp
This is an inexpensive way to test automotive rear window defrosters and identify broken defroster lines. Less expensive and easier to use than a volt meter the test lamp kit is a 12v lamp with two long wire leads attached. It's is easy to find those small hard to find defroster breaks. Comes with full instructions.

2400 Test Lamp Kit - $14.95

More  |  Add to Cart  |  View Cart  |  Checkout

Master Defroster Repair Kit
The professionals choice for the best all-in-one defroster repair kit. The Master Kit was developed for professionals and includes everything needed to repair the most common automotive rear window defroster problems including broken grids, separated tabs and damaged connectors.

2700 Master Kit - $69.95

More  |  Add to Cart  |  View Cart  |  Checkout