Frost Fighter Defroster Repair and Replacement Kits

2300 Frost Fighter Uni-Clip Kit

Working Defroster is a must for winter driving

Winter Driving
Challenges

Order online or call us

For more information

Our Fax Number

Professional Glass Repair and Mechanics

 

 

What Our
Customers Say
 

Online Catalog
Here
 

Frequently
Asked Questions
 

International
Customers
 


 


Frost Fighter Kits

Back to Catalog
Troubleshooting Guide
Frequently Asked Questions

Replaces the Tab/ClipUni-Clip Kit
Each rear window defroster has two main power tab/clips located along the sides of the defroster on the vertical main power bars. Each of these tab/clips has a wire attached which connects vehicle power to the defroster at each side of the defroster. When these main power tab/clips separates from the defroster they can be lost or damaged.

If the vehicles original tab/clip is damage it can be replaced with a Uni-Clip Kit. Each Uni-Clip Kit includes two different plated copper replacement tabs and fit all makes and models.

Remove tam/clip from connectorUni-Clip Kit Repairs
If your vehicles defroster stops working entirely check the main tab/clips on each side of the rear window defroster. If you spot a hanging wire and tab/clip you can reattach this easily using the 2000 Tab Repair Kit.

If the tab/clip has been damaged or lost then it can be replaced with the Uni-Clip Kit. Repairs are simple. First, you will need both a 2300 Uni-Clip and 2000 Tab Kit to do the job since the Uni-Clip kit does not include the conductive adhesive. Next, mix the conductive silver adhesive following the fully illustrated instructions. Dip the new Uni-Clip in the silver adhesive.

The Tab/Clip going back on the defroster

Then position the Tab/Clip directly on the defroster making a good connection between the defroster and the tab/clip. Follow the instructions for curing. Frost Fighter tab repair adhesive makes both the electrical and structural connection in a single operation. Once cured, reconnect the main power connectors to the uni-clip tab bonded on the defroster and the job is complete.

This kit does not include the conductive adhesive needed to bond the tab/clips to the defroster. ORDER THE 2000 FROST FIGHTER TAB KIT TO ATTACH UNI-CLIPS TO THE DEFROSTER!

 

Preview Uni-Clip Instruction Sheet
Adobe PDF (300 Kb)

If the tab connector is missing or damaged use the 2320 Frost Fighter Uni-Con Connector Kit to replace the missing or damaged connectors. 

2300 Uni-Clip Kit - $5.95   

Catalog  |  Add to Cart  |  View Cart  | Checkout

 

Back to Catalog

Defroster Troubleshooting Guide

Frequently Asked Questions

Frost Fighter Products

What Our Customers Say

 

See our full online catalog here